How To Apply Aqua Fend

To get the best results from Aqua Fend^® it is important to follow the instructions below.

SUBSTRATE PREPERATION

Substrates must always be clean, dust-free, and dry.

Read product information sheet prior to commencing application. This can be downloaded on the Aqua Fend F and Aqua Fend G product pages.

Remember to wear appropriate PPE (including gloves, mask/respirator, tyvek suit, and eye wear) during application

Use the product directly from the container. Shake the container well, before use
On application, always apply from bottom up
Always test out the product on a small hidden portion of the substrate
Ideally apply using a High-Volume, Low-Pressure sprayer
The substrate must be impregnated to the point of saturation in a single application process (wet-on-wet)
Do not over-apply the product
Water repellence achieved within 24 hours
Optimum effectiveness obtained after 7 days
Clean equipment with water

Get in touch with us using our contact form, or call us on +44(0)208 4531494.